Camaro Catch Can, V6, 2010-2014

• Features All Stainless Steel Mounting Hardware
• 3/8" ID Fuel And Oil Vapor Compatible Hose
• Includes PCV Adaptor Hardware
• Black Zinc Plated Hose Clamps
• Brass Hose Barb Fittings Are Standard
• Stored Oil Volume Is Approximately 8 Ounces

This catch can assembly for your 2010, 2011, 2012, 2013, and 2014 Camaro V6 is beautifully anodized in a choice of available colors, complete with 3/8" barbed inlet/outlet hose fittings. It includes custom machined mounting bracket to fit your Camaro LS3 V8 SS. The proven design incorporates a stainless steel mesh and screening mechanism that acts like a maze to collect and condense the oil vapor. Once the oil vapors condense into liquid droplets, it falls to the bottom of the can. In addition, the top assembly is specially designed to keep any liquid from climbing out the exit hole during aggressive driving conditions. Trust Rick's Camaro for all your 2010-2014 Camaro performance needs. Purpose of The PCV System: The PCV (Positive Crankcase Ventilation) system is designed to regulate and remove fumes from the engine crankcase, and to alleviate crankcase pressure which could cause oil leaks or seal damage. The PCV system routes crankcase fumes into the intake manifold where they can be burned to eliminate harmful emissions into the atmosphere. The PCV valve controls the amount of crankcase flow volume depending on the engine's load. With large throttle openings (high engine loads), the more blow-by gases are produced, and the more the PCV system flows oil vapor in to the intake manifold. A small amount of that ignited mixture leaks past the piston rings and ends up in the crakcase. This leakage is often referred to a "blow-by" or leakage past the pistons. Some of the oil mist and other products settle along the engine intake and over time form a "gunk". Our oil catch can collects the oil mist and condensed the fuel vapors while allowing "cleaner" gasses to pass back into the intake manifold. Note: Each Catch Can kit includes everything you need to install the system. Basic mechanical skills and common hand tools are the only things required.

2010-2014 Camaro Air & Oil Seperator, V6